Enter any value of the circumference in cm, and then press the SET button. Pressing the MODE button increases the numeric value flashing, whereas pressing and holding the MODE button moves the digit.With 205 displayed on the screen, press and hold the MODE button.* Entering the tire circumference ensures more accurate measurements. * Generally, the tire size is indicated on the side of the tire.ĭetailed setting (enter the numeric value of the tire circumference) Select the tire size (inch) of your bicycle, and then press the SET button. Simple setting (select from the tire size) Set the tire size by either one of the following methods. Press the AC button on the back of the computer. Perform the clear all data operation as shown below, when you use the unit for the first time or restore the unit to the condition checked at the factory.
* The specifications and design are subject to change without notice. Slow response or black LCD at lower or higher temperature may happen respectively.)Ģ-3/16" x 1-15/32" x 5/32" (55.5 x 37.5 x 18.5 mm) / 1.06 oz (30 g) * The factory-loaded battery life might be shorter than the above-mentioned specification.Ĥ bit, 1-chip microcomputer (Crystal controlled oscillator)Ģ6", 700c, 27", 16", 18", 20", 22" and 24", or tire circumference of 100 cm - 299 cm (initial value: 26 inch)ģ2☏ - 104☏ (0☌ - 40☌) (This product will not display appropriately when exceeding the Working Temperature range. * After replacing the battery, be sure to set the unit again according to the procedure specified in "Preparing the computer".
#CATEYE ENDURO 8 PROGRAMMING INSTALL#
Install a new lithium battery (CR2032) with the (+) side facing upward. When the display becomes dim, replace the battery.
#CATEYE ENDURO 8 PROGRAMMING MANUAL#
With its user-friendly design and accurate readings, it is a valuable accessory for any rider looking to track and improve their performance.Before using the computer, please thoroughly read this manual and keep it for future reference. In conclusion, the Cateye Enduro 8 CC-ED300 is a reliable and durable bicycle computer that provides essential information to cyclists. It has a single button for easy operation, making it user-friendly for cyclists of all levels. The Cateye Enduro 8 CC-ED300 comes with a wire transmission system, which accurately relays data from the sensor to the computer. This feature eliminates the need for manual operation, allowing cyclists to focus on their ride. This bicycle computer has an auto start/stop feature, which means it automatically starts recording data when the bike is in motion and stops when it is stationary. The computer is also shock-resistant, making it suitable for off-road cycling. It is resistant to water and can withstand rainy weather conditions. The Cateye Enduro 8 CC-ED300 is easy to install and compatible with a wide range of bicycles. The computer is powered by a replaceable battery, ensuring long-lasting use. It also features a clock and a stopwatch function, which can be useful for training or timing rides. With its large display, the Cateye Enduro 8 CC-ED300 allows riders to easily read their speed, distance traveled, and elapsed time. It is designed for outdoor use and is suitable for a variety of terrains. The Cateye Enduro 8 CC-ED300 is a bicycle computer that provides accurate and essential information to cyclists.
0 kommentar(er)
